Series 880A inverted-bucket steam trap
The 880A steam-trap series uses an inverted bucket to discharge condensate. Steam collecting beneath the bucket raises it and closes the outlet; discharge resumes as buoyancy falls
Specifications & order
CD33S thermodynamic steam trap with strainer
The CD33S combines a thermodynamic disc mechanism with an internal strainer. Its section shows a body and strainer passage different from the replaceable-capsule CD60 construction, while using the same general cyclic condensate-discharge principle. The body and cap are chromium-alloy steel, with a stainless-steel disc and strainer. Listed limits are maximum allowable pressure of 41 bar, maximum temperature of 400 °C and minimum operating pressure of 0.24 bar.
Technical specifications
| Type | CD33S |
|---|---|
| Mechanism | Thermodynamic disc |
| Body and cap | Chromium-alloy steel |
| Disc and strainer | Stainless steel |
| Maximum limits | 41 bar / 400 °C |
| Minimum operating pressure | 0.24 bar |
More products
Stainless inverted-bucket steam trap
The Series 1000 inverted-bucket steam trap is described for vertical upward installation. This steam-condensate configuration has a 304L stainless-steel body, 304 internals and a h
Specifications & order
Horizontal inverted-bucket trap
This inverted-bucket steam trap is described for horizontal installation and includes the 1800 model group. Condensate is discharged at saturation temperature, with each model's ca
Specifications & order
Universal-connection steam trap
The universal-connection steam trap is intended for a connector, PPC or TVS station, or manifold. The separate connector permits installation in different positions; models 2010 an
Specifications & order